New building needs water
A tap and meter are required.
Taps on the main, corporation stops and meter boxes set to the utility specification.

The tap is where a new service meets the main, and it is one of the most important connections on a water job. A clean tap with the right corporation stop and a level, well-supported meter box means a service that works for decades.
We prepare the excavation, work with the utility on the tap, install the corporation stop, run the service line and set the meter box at grade with a stable base. Where the utility sets the meter, we leave the box ready with the proper fittings and lid.
A tap and meter are required.
It needs resetting.
A new location is planned.
A bigger tap is needed.
Tap and meter requirements.
Safe and shored.
Corporation stop and service.
Level, stable, at grade.
Lawn or paving repaired.
A proper tap that lasts.
Does not sink or tilt.
Built to the spec.
Restored surface.
The utility usually does. We prepare everything for it.
Often yes, with the utility.
A valve at the main that controls the service.
Often a few hours once the area is open.
Water Service Line InstallationThe line from the main to your meter and building, installed in copper, PEX or HDPE.Explore
Valve and Valve Box InstallationGate valves and valve boxes set plumb, accessible and ready to shut off a line fast.Explore
New Home Utility HookupsWater, sewer, gas, electric and fiber trenches from the street to your new home, planned to…Explore
Water Main InstallationNew water mains laid in ductile iron, C900 PVC or HDPE with restrained joints and tested li…Explore Tell us what you are building or fixing. We will walk the route, locate what is already there and give you a written plan with a Free Estimate and no pressure.