Excavation and Trenching

Rock Excavation and Hammering in Knoxville, TN

Hydraulic hammers and rock-ready machines for trenches through East Tennessee limestone.

  • LayerThe first few feet
  • SafetyShored and supervised
  • FinishCompacted backfill
Rock Excavation and Hammering in Knoxville, TN
Rock Excavation and Hammering

East Tennessee sits on layers of limestone, shale and sandstone, and many utility routes hit rock a few feet down. A bucket cannot dig it, so the job needs a hydraulic hammer, the right machine size and a plan for what comes out. Good rock work keeps the schedule moving.

We use a hammer attachment on an excavator to break rock in controlled bites, load the pieces for haul-off and shape the trench to the depth and width the pipe needs. Rock is replaced with clean bedding stone so pipe and cable are never laid on sharp edges. We also manage vibration and dust near homes.

Signs to watch for

When this is the right call

Refusal on a bucket

The ground is too hard to dig.

Ledge or boulders in the route

Rock must be broken.

Hillside lots

Rock is near the surface.

Tight neighborhood work

Noise and vibration need care.

How it goes

From first call to the finished job

  1. 01

    Probe the route

    Rock depth and extent are estimated.

  2. 02

    Bring the hammer

    The right size for the site.

  3. 03

    Break and load

    Rock is removed in controlled bites.

  4. 04

    Shape the trench

    Square walls at the right depth.

  5. 05

    Place clean bedding

    Stone replaces sharp rock.

See the difference

Drag the flag to compare.

After: The same lawn, compacted and sodded
Before: A raw trench scar across a front lawn
BeforeA raw trench scar across a front lawnAfterThe same lawn, compacted and sodded
After: The same street, patched flat and sealed
Before: A rough, sunken cut across a street
BeforeA rough, sunken cut across a streetAfterThe same street, patched flat and sealed
After: A clean shored trench with new color-coded lines
Before: An open excavation with old tangled lines
BeforeAn open excavation with old tangled linesAfterA clean shored trench with new color-coded lines
What you get

Benefits you can see and feel

Keeps the schedule

Rock does not stop the job.

Protects the pipe

Clean bedding under every line.

Controlled work

Vibration and dust managed.

Fits the region

We know local ground.

Good questions

Rock Excavation and Hammering: answers

Can you trench through solid limestone?

Yes. A hammer on an excavator breaks it, and we remove the pieces.

Will it be loud?

Hammering is loud. We plan work hours and tell neighbors when we can.

What about blasting?

We do not blast. We use mechanical breaking.

What happens to the rock?

It is hauled off or used where you want it.

Ready when you are

Let’s plan what goes underground.

Tell us what you are building or fixing. We will walk the route, locate what is already there and give you a written plan with a Free Estimate and no pressure.

  • We locate before we dig
  • Trench, bore or burst, whichever fits
  • Restored clean and recorded
(865) 433-0958

Request a Free Estimate

We reply fast and never share your details.

or call (865) 433-0958