Boring and Trenchless

Drilling Fluid and Spoil Management in Knoxville, TN

Mixing, recycling and cleanly disposing of drilling fluid keeps bores and sites under control.

  • SurfaceLeft in place
  • MethodsBore, burst, ram
  • CrossingsRoads, drives, creeks
Drilling Fluid and Spoil Management in Knoxville, TN
Drilling Fluid Management

Every directional bore uses a slurry of water and clay to cool the bit, carry cuttings and keep the hole open. Managed well, it stays in its pits and tanks. Managed poorly, it can find its way into streets and creeks. Fluid control is part of professional drilling.

We mix fluid for the soil, recycle it in tanks, catch it at entry and exit pits with vacuum trucks and haul spoil to approved locations. Sediment barriers protect storm drains and creeks. If we see a loss of returns, we change the mix and pressure to stop it.

Signs to watch for

When this is the right call

Bore near a creek or drain

Slurry must be controlled.

Neighborhood job

Mud on the street is a problem.

Long or deep bore

Fluid must be managed.

Loose or sandy ground

Fluid mix needs adjusting.

How it goes

From first call to the finished job

  1. 01

    Test the soil

    Fluid mix chosen.

  2. 02

    Set tanks and pits

    Contain the slurry.

  3. 03

    Recycle during the bore

    Less waste.

  4. 04

    Vacuum and haul spoil

    Approved locations.

  5. 05

    Clean the site

    Streets and drains protected.

See the difference

Drag the flag to compare.

After: The same lawn, compacted and sodded
Before: A raw trench scar across a front lawn
BeforeA raw trench scar across a front lawnAfterThe same lawn, compacted and sodded
After: The same street, patched flat and sealed
Before: A rough, sunken cut across a street
BeforeA rough, sunken cut across a streetAfterThe same street, patched flat and sealed
After: A clean shored trench with new color-coded lines
Before: An open excavation with old tangled lines
BeforeAn open excavation with old tangled linesAfterA clean shored trench with new color-coded lines
What you get

Benefits you can see and feel

Clean sites

Slurry stays contained.

Protected waterways

Barriers in place.

Right mix

Matched to the ground.

Less waste

Fluid is recycled.

Good questions

Drilling Fluid Management: answers

What is in drilling fluid?

Mostly water and bentonite clay.

Where does it go afterward?

It is hauled to approved locations.

What is a frac-out?

When fluid escapes to the surface. We control pressure to prevent it.

Do you protect storm drains?

Yes, with barriers and cleanup.

Ready when you are

Let’s plan what goes underground.

Tell us what you are building or fixing. We will walk the route, locate what is already there and give you a written plan with a Free Estimate and no pressure.

  • We locate before we dig
  • Trench, bore or burst, whichever fits
  • Restored clean and recorded
(865) 433-0958

Request a Free Estimate

We reply fast and never share your details.

or call (865) 433-0958